The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window. The driver has a power window lock button which can block the operation of passenger windows. The power windows can be operated for approximately 30 seconds after the ignition key is removed or turned to the ACC or LOCK (or OFF) position. However, if the front doors are opened, the power windows cannot be operated even within the 30 second period.
✽ NOTICE
While driving with the rear windows down or with the sunroof (if equipped) in an open (or partially open) position, your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is a normal occurrence and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly reduce the size of the sunroof opening.
Components and Components Location
Components (1)
[Second Row Seat Assembly]
1. Second Row Seat Cushion Silence2. Second Row Seat Cushion Pad3. Second Row Seat Cushion Covering4. Second Row Seat Cushion Shield Inner Cover5. Secon ...
Seat Belt Pretensioner (BPT) Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center
Pillar (LH & RH). When a vehicle crashes with a certain degree of
frontal impact, the pretensioner seat belt helps ...