Kia Sedona: Front Pillar Trim Repair procedures - Interior Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Pillar Trim Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Interior Trim / Front Pillar Trim Repair procedures

Replacement
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
   
Take care not to bend or scratch the trim and panels.
1.
Remove the front door body side weatherstrip.
2.
Remove the front pillar trim (A) using a screwdriver or remover.

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Pillar Trim Components and Components Location
Component Location 1. Front pillar trim ...

Center Pillar Trim Components and Components Location
Component Location 1. Center pillar lower trim2. Center pillar upper trim ...

Other Information:

Rear Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the actuator operates to the recirculation position when 12V is connect ...

Repair procedures
Replacement [Front]     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective ...

Categories

Copyright © www.kisedona.com 2016-2026