Kia Optima Manuals

Kia Sedona: Sunvisor Repair procedures - Roof Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Sunvisor Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Roof Trim / Sunvisor Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Loosen the mounting screw and remove the retainer (A).

2.
Remove the sunvisor mounting cover (A) and loosen the screw.

3.
Disconnect the sunvisor connector (A) and remove the sunvisor (B).

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
Sunvisor Components and Components Location
Component Location 1. Sunvisor2. Retainer ...

Assist Handle Components and Components Location
Component Location 1. Assist handle ...

Other Information:

Blind Spot Detection Unit Schematic Diagrams
Circuit Diagram ...

Evaporator Temperature Sensor Description and Operation
Description The evaporator temperature sensor detects the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. ...

Categories


Copyright © www.kisedona.com 2016-2025