Kia Sedona: Outside Rear View Mirror Repair procedures - Mirror - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Outside Rear View Mirror Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Mirror / Outside Rear View Mirror Repair procedures

Replacement
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the front door quadrant inner cover (A).

2.
Loosen the outside rear view mirror mounting bolts & screw (A).

3.
Remove the outside rear view mirror (A) after disconnecting the outside rear view mirror connector (B).

4.
Install in the reverse order of removal.
   
Make sure that the connectors are connected in properly.
Replace any damaged clips.
Outside Rear View Mirror Components and Components Location
Component Location 1. Outside rear view mirror ...

Inside Rear View Mirror Components and Components Location
Component Location 1. Inside rear view mirror ...

Other Information:

Line Pressure Control Solenoid Vale Specifications
Specification Item SpecificationControl typeN/H (Normal High)Control pressure kpa (kgf/cm², psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value (mA) 50 ~ 850Coil resistance(Ω)5.1 ± 0.3 ...

Canister Close Valve (CCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

Categories

Copyright © www.kisedona.com 2016-2026