Replacement |
[Front] |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Loosen the mounting screws and remove the sunshade stoper (A). |
3. |
Loosen the nuts and remove the drain channel (A). |
4. |
Remove the sunshade (A) in the direction of the arrow. |
5. |
Install in the reverse order of removal. |
[Rear] |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Loosen the mounting screws and remove the sunshade stoper (A). |
3. |
Remove the sunshade (A) in the direction of the arrow. |
4. |
Install in the reverse order of removal. |
Barometric Pressure Sensor (BPS) Description and Operation
Description
Barometric Pressure Sensor (BPS) is a speed-density type
sensor and is installed on the air cleaner assemby. It senses absolute
pressure of the air cleaner assemby and transfers the ...
Components and Components Location
Component Location
1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. BCM (Body Control Module)
...