Replacement |
1. |
Remove the clips (C) and remove the rear door side weatherstrip (A).
|
2. |
Install in the reverse order of removal.
|
Reservoir Tank Repair procedures
Removal and Installation
1.
Disconnect the over flow hose (A), and then drain the coolant from the reservoir tank.
2.
Remove the reservoir tank (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ...
Repair procedures
Adjustment
Glass Adjustment
Check the glass run channel for damage or deterioration, and replace if necessary.
1.
Remove the front door trim.
(Refer to Front Do ...