Kia Sedona: ESC OFF Switch Repair procedures
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch Repair procedures
| Inspection |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel") |
| 3. |
Remove the crash pad side switch assembly (A).
|
| 4. |
Check the continuity between the switch terminals as the ESC OFF switch is engaged.
|
ESC OFF Switch Description and Operation
Description
1.
The ESP OFF switch is used by users to turn off the ESP system.
2.
The ESP OFF lamp is on when ESP OFF switch is engaged. ...
Steering Angle Sensor Description and Operation
Description
Installed in MDPS (Motor Driven Power Steering), the Steering
Angle Sensor (SAS) sends signals to HECU through CAN communication
line.
The SAS is used to determine turning directio ...
Other Information:
Barometric Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]10.0 (0. ...
Pantoscopic Camera Components and Components Location
Components
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026