Kia Sedona: Schematic Diagrams| Circuit Diagram - ESC (1) |

| Circuit Diagram - ESC (2) |

| Circuit Diagram - ESC (3) |

| Circuit Diagram - ESC (4) |

| ESC connector input/output |

| Pin No | Connector Terminal | Pin No | Connector Terminal | ||
| 1 | W | E/R Junction Block (Fuse - ABS1) | 20 | L | Rear Wheel Sensor LH (RL SIG) |
| 2 | - | - | 21 | B | Local-CAN (Low) |
| 3 | - | - | 22 | O | Front Wheel Sensor LH (FL SIG) |
| 4 | - | - | 23 | - | - |
| 5 | - | - | 24 | - | - |
| 6 | O | Front Wheel Sensor RH (FR SIG) | 25 | L/R | E/R Junction Block (Fuse - ABS2) |
| 7 | - | - | 26 | G | C-CAN (High) |
| 8 | R | Bezel Switch (ESC Switch) | 27 | W/B | PCM (Vehicle Speed Signal) |
| 9 | Y | Local-CAN (High) | 28 | - | - |
| 10 | Gr/O | Brake Switch | 29 | - | - |
| 11 | - | - | 30 | G/B | Stop Lamp Switch |
| 12 | B | - | 31 | Y | Rear Wheel Sensor RH (RR SIG) |
| 13 | O | Ground (GE06) | 32 | Gr | PCB Block (Fuse - ABS3) |
| 14 | - | C-CAN (Low) | 33 | R | Rear Wheel Sensor LH (RL VCC) |
| 15 | - | - | 34 | L | Front Wheel Sensor LH (FL VCC) |
| 16 | - | - | 35 | - | - |
| 17 | - | - | 36 | - | - |
| 18 | G | Front Wheel Sensor RH (FR VCC) | 37 | - | - |
| 19 | W | Rear Wheel Sensor RH (RR VCC) | 38 | B | Ground (GE06) |
Description and Operation
TroubleshootingRemoving the tumble seat (for 8 passenger vehicle)
1. Insert the seat belt in the belt assembly cover.
2. Insert the seat belt buckle in the seat cushion pocket.
3. Lower the headrest to the lowest position.
4. Slide the seat to the farthest ...
Stowing the rear seat belt
2nd row seat (for 2nd row center seat, if equipped)
3rd row
The rear seat belt buckles can be stowed in the pocket between the rear seatback
and cushion when not in use.
Routing the seat be ...