Kia Sedona: Seat Belt Buckle Switch (BS) Description and Operation
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation
| Description |
The SRSCM shall monitor the status of the driver and front
passenger seat belt buckle. The SRSCM provides one pin each for the
driver and front passenger seat belt buckle status input. The seat belt
buckle circuit operates from internal boost voltage supplied by the
SRSCM, and uses chassis ground for the signal return. The buckle status
shall modify the SRSCM deployment. If the buckle status is unbuckled,
the corresponding pretensioner will not be deactivated.
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor (P-SIS)
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
...
Other Information:
Massage Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat back cover.
(Refer to Body - "Front Seat Back Cover")
3.
Disconnect the lumbar support motor connectors ( ...
Rear Bumper beam Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026