Kia Sedona: Side Impact Sensor (SIS) Description and Operation
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
| Description |
Side Impact Sensor (SIS) system consists of two Pressure Side
Impact Sensors (P-SIS), installed at each center of front door modules
(LH and RH), two SIS, installed at each center of nearby pillars (LH and
RH), and two rear SIS, installed in the rear pillars (LH and RH).
Pressure Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM determines the deployment of airbag and the time of
deployment based on the collision signal from the SIS at the time of
collision.
Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front i ...
Side Impact Sensor (SIS) Components and Components Location
Components
...
Other Information:
Illuminated ignition switch
Whenever a front door is opened, the ignition switch will illuminate for your
convenience, provided the ignition switch is not in the ON position. The light will
go off immediately when the igni ...
Immobilizer Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector of the immobiliz ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025