Kia Sedona: Curtain Airbag (CAB) Module Repair procedures| Removal |
| 1. |
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. |
| 2. |
Remove the roof trim.
(Refer to Body - "Roof trim assembly") |
| 3. |
Disconnect the curtain airbag harness connector (A).
|
| 4. |
After loosening the mounting bolts and nuts remove the curtain airbag.
|
| Installation |
| 1. |
Remove the ignition key from the vehicle. |
| 2. |
Disconnect the battery negative cable and wait for at least thirty seconds. |
| 3. |
Tighten the curtain airbag mounting bolts and nuts.
|
| 4. |
Connect the curtain airbag connector. |
| 5. |
Install the roof trim.
(Refer to Body - "Roof trim assembly") |
| 6. |
Reconnect the battery negative cable. |
| 7. |
After installing the curtain airbag (CAB), confirm proper system operation:
|
Airbag Module Disposal Description and OperationOperating condition
This system activates when the parking assist button is pressed with the
Engine Start/Stop Button ON.
The parking assist button turns on automatically and activates the parking
assist sys ...
Dynamic Damper Components and Components Location
Components
1. BJ assembly2. BJ circlip3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band9. TJ boot10. Spider assembly11. Retainer ring12. TJ housing13. Housin ...