The alarm will be activated if any of the following occurs while the system is armed.
The horn will sound and the hazard warning lights will blink continuously for approximately 27 seconds, and repeat the horn 3 times unless the system is disarmed. To turn off the system, unlock the doors with the ignition key or transmitter (or smart key).
Relay Box (Engine Compartment) Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay block.
Power Relay (Type A)
Check for continuity between the terminals. ...
TPMS Sensor Repair procedures
Removal
1.
Remove the tire.
(Refer to Tires/Wheels - "Tire")
2.
Remove the screw with torx driver (A).
•
When installing the bead brake, make sure tha ...