Kia Sedona: 35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: 35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications

Specification
Item
Specification
Control type
N/H (Normal High)
Control pressure kpa (kgf/cm², psi)
"500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Components and Components Location
Component Location 1. 35R Clutch control solenoid valve (35R/C_VFS) ...

Other Information:

Power Window Relay Repair procedures
Inspection Diagnosis With GDS 1. It can quickly diagnose defects of power window by communicating with GDS. GDS can operate actuator forcefully, monitor input/output values and self diagnose. ...

Photo Sensor Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will in ...

Categories


Copyright © www.kisedona.com 2016-2025