Kia Sedona: Transaxle Oil Temperature Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Transaxle Oil Temperature Sensor Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Specifications

Specification
Item
Specification
Type
*NTC thermistor
Temp.[(°C)°F] / Resistance (kΩ)
(-40)-40 / 48.1
(-20)-4.0 / 15.6
(0)32.0 / 5.88
(20)68.0 / 2.51
(40)104.0 / 1.19
(60)140.0 / 0.61
(80)176.0 / 0.32
(100)212.0 / 0.18
(120)248.0 / 0.10
(140)284.0 / 0.06
(150)302.0 / 0.05

*NTC: Negative Temperature Coefficient
Transaxle Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. Specification: Below 1Ω ...

Transaxle Oil Temperature Sensor Description and Operation
Description • The sensor used is a thermistor (NTC) in which resistance changes with temperature variation. • The TCM supplies about 5 voltage to the sensor; the output value ...

Other Information:

156,000 km (97,500 miles) or 78 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect power steering fluid (if equipped) ❑ Inspect power ...

Walk-in seat (2nd row seat)
To get in or out from the 3rd row seat, 1. Lift the armrest up and lower the head rest to the lowest position (if necessary). 2. Pull up the walk-in lever (1) or pull the walk-in strap (2) on the ...

Categories

Copyright © www.kisedona.com 2016-2026