Kia Sedona: Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Repair procedures

Adjustment

TCM adaptive values learning

•	TCM adaptive values learning: When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.

•	In the following case, TCM learning is required.

–	Automatic transaxle assembly replacement

–	TCM upgrading or replacement

–	Valve body replacement

TCM adaptive values learning procedure

•	Static learning (condition: ATF temperature 40~100°C (104~212°F)

1)	Step on the brake, and then pause for 3 seconds each on "N" range and "D" range.

2)	Repeat the above procedure four times.

•	Driving learning

Drive the vehicle through all the gears. (1st → 2nd → 3rd → 4th → 5th → 6th)

Keep the throttle position (15~25%) steady while driving the vehicle.

2)	Decelerate the vehicle by stepping on the brake (6th → 5th → 4th → 3rd → 2nd → 1st).

3)	Repeat the above procedure four times.

Description and Operation

Description Automatic transaxle control system relies on various measurement data to determine the current control status and determine the necessary compensation values. These values are used ...

Transaxle Control Module (TCM) Components and Components Location

Component Location 1. Transaxle Control Module (TCM) ...

Other Information:

Output Speed Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...

Dynamic Damper Repair procedures
Removal 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Remo ...

Kia Sedona: Repair procedures

Description and Operation

Transaxle Control Module (TCM) Components and Components Location

Other Information:

Categories