Kia Sedona: Fuel Pump Motor Repair procedures - Fuel Delivery System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Fuel Pump Motor Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Motor Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A) and fuel pump connector (B).

3.
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.

4.
Remove the reservoir cup (B) after releasing the fixing hook (A).

5.
Disconnect the ground wire (A).

6.
Separate the fuel pump motor and filter after removing the fuel pump motor (A).

7.
Remove the fixing clip (A), and then assist pump assembly (B).

8.
Separate the electric pump motor (A).

9.
Replace new fuel filter.

Installation
1.
Install in the reverse order of removal.
Fuel Filter Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A) and fuel pump connector (B). 3. Remove the cushion pipe fixi ...

Fuel Sender Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Lift the fixing hook (B) by using a common driver, and ...

Other Information:

Intake Actuator Description and Operation
Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculat ...

AC Inverter Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear console assembly. (Refer to Body - "Floor Console Assembly") 3. Disconnect the AC inverter unit connector (A). ...

Categories

Copyright © www.kisedona.com 2016-2026