Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
2. |
Disconnect the fuel sender connector (A) and fuel pump connector (B). |
3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. |
4. |
Remove the reservoir cup (B) after releasing the fixing hook (A). |
5. |
Disconnect the ground wire (A). |
6. |
Separate the fuel pump motor and filter after removing the fuel pump motor (A). |
7. |
Remove the fixing clip (A), and then assist pump assembly (B). |
8. |
Separate the electric pump motor (A). |
9. |
Replace new fuel filter. |
Installation |
1. |
Install in the reverse order of removal. |
Starter Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and th ...
Overhead Console Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp (A) after loosening the screws.
3.
Disconnect the connector (A) from the overhead console lamp. ...