Description |
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury. |
Brake Line Repair procedures
Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservior with a syringe.
&nb ...
Front windshield wiper blade
Type A
1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic
locking clip.
CAUTION - Wiper arms
Do not allow the wiper arm to fall against the windshield, since it ...