Inspection |
1. |
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not in normal condition, replace
wiper and wiper switch. Rear Wiper Switch Rear Washer Switch |
Water Jacket Seperator Repair procedures
Removal
1.
Remove the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket seperators (A).
Installation
1.
Install the ...
On curves
On curves, the SCC may not detect a moving vehicle in your lane, and then
your vehicle could accelerate to the set speed. Also, the vehicle speed will
rapidly slow down when the vehicle ahead ...