Kia Sedona: Rear Seat Assembly Components and Components Location - Rear Seat - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Seat Assembly Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly Components and Components Location

Component Location
[Second Row Seat Assembly]

1. Second Row Seat Assembly [RH]
2. Second Row Center Seat Assembly
3. Second Row Seat Assembly [LH]

1. Second Row Seat Assembly

[Third Row Seat Assembly]

1. Third Row Seat Assembly [RH]
2. Third Row Seat Assembly [LH]

Components and Components Location
Components (1) [Second Row Seat Assembly] 1. Second Row Seat Cushion Silence2. Second Row Seat Cushion Pad3. Second Row Seat Cushion Covering4. Second Row Seat Cushion Shield Inner Cover5. Secon ...

Rear Seat Assembly Repair procedures
Replacement [Second row seat assembly] [7Seat/8Seat] 1. Loosen the second row seat front mounting bolts (A) after opening the cap (B). 2. Pull up the seat by pulling the stand-up lever. ...

Other Information:

To resume cruising speed at more than approximately 30 km/h (20 mph)
If any method other than the CRUISE ON-OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you move the lever ...

Evaporator Temperature Sensor Description and Operation
Description The evaporator temperature sensor detects the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. ...

Categories

Copyright © www.kisedona.com 2016-2026