Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
After loosening the mounting screws, remove the rear door inside handle (A). |
3. |
Disconnect the rear door inside handle cable (A). |
4. |
Install in the reverse order of removal.
|
Engine Control Module (ECM) Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove the air cleaner asse ...
Front Washer Motor Repair procedures
Inspection
Front Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with wa ...