Kia Sedona: Rear Coil Spring Repair procedures - Rear Suspension System - Suspension System - Kia Sedona YP Service ManualKia Sedona: Rear Coil Spring Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Suspension System / Rear Suspension System / Rear Coil Spring Repair procedures

Removal
1.
Remove the rear wheel and tire (A) from rear hub.

Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

   
Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

2.
Support the jack and then remove the carrier bolt (B).

Tightening torque:
156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

3.
Remove the spring (A), the upper pad (B) and the lower pad (C).

4.
Install in the reverse order of removal.
5.
Check the rear alignment.
(Refer to Rear Suspension System - "Rear Alignment")
Inspection
1.
Check the spring for distortion, aging or damage.
2.
Check the spring upper pad and lower pad for aging or damage.
Rear Lower Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Trailing Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Other Information:

USB charger
Front Rear The USB charger is designed to recharge batteries of small size electrical devices using a USB cable.The electrical devices can be recharged when the Engine Start/Stop button is i ...

Description and Operation
Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, int ...

Categories

Copyright © www.kisedona.com 2016-2026