Kia Sedona: Power Steering Pump, Belt and Hoses Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Power Steering Pump, Belt and Hoses Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Maintenance / Chassis / Power Steering Pump, Belt and Hoses Repair procedures

Inspection
Power steering pump and hoses
Visually check for proper installation, chafing, cracks, deterioration and any leakage.
Replace any deteriorated or damaged parts immediately.
Power steering belt
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
Power Steering Fluid Repair procedures
Inspection Check that the power steering fluid is filled up to the level of MAX level mark on the reservoir. ...

Steering Gear Rack, Linkage and Boots Repair procedures
Inspection 1. Check the steering wheel free road. (1) Turn the steering wheel so that the front wheels are facing straight ahead. (2) Measure the distance where the steering wheel can be tur ...

Other Information:

TPMS Receiver Repair procedures
Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to B ...

Piston and Connecting Rod Repair procedures
Disassembly     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the con ...

Categories


Copyright © www.kisedona.com 2016-2025