Removal and Installation
1.
Remove the air duct.
(Refer to Intake And Exhaust System - "Air Cleaner")
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove th ...
Removal and Installation
1.
Remove the oil level gauge rod (A) and the oil level gauge (B).
Tightening torque:
18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)
...
Other Information:
Indicator light
When ignition switch is turned to ON, the indicator light illuminates, then goes
off if the ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating or illuminat ...