Kia Sedona: Fuel Pressure Control Valve (FPCV) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Fuel Pressure Control Valve (FPCV) Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve (FPCV) Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.04 ~ 1.27 [23°C(73.4°F)]

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Fuel Pressure Control Valve (FPCV) Description and Operation
Description Fuel Pressure Control Valve, installed on the high pressure fuel pump, controls fuel flow into the injectors in accordance with the ECM signal calculated based on various engine con ...

Other Information:

Components and Components Location
Components 1. Front pillar trim2. Cowl side trim3. Center pillar upper trim4. Center pillar assist trim5. Center pillar lower trim6. Rear pillar trim7. Tailgate fillar trim8. Front door scuff tri ...

Door Lock
Type A Type B 1. Close all doors, engine hood and tailgate. 2. Press the lock button(1). 3. All doors and tailgate will lock. The hazard warning lights will blink once. 4. If the lock button ...

Categories

Copyright © www.kisedona.com 2016-2026