Kia Sedona: Fuel Filler Door Open Switch Repair procedures - Fuel Filler Door - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Fuel Filler Door Open Switch Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Open Switch Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the fuel filler door open switch (A) after pushing the hooks inside.

Installation
1.
Install the fuel filler door open switch.
2.
Install the crash pad lower panel.
3.
Connect the negative (-) battery terminal.
Inspection
1.
Check the switch for continuity between the No. 1 and No. 6 terminals. If the continuity is not as specified, replace the fuel filler door open switch.

Fuel Filler Door Open Switch Components and Components Location
Components ...

Hands Free System
...

Other Information:

Transaxle Control Module (TCM) Schematic Diagrams
TCM Connector TCM terminal function Connector [A] PinDescription10CAN (High)27Ignition switch29Sports mode up switch35CAN (Low)44Inhibitor switch signal ''S1''45Inhibitor switch signal ''S2''4 ...

Inner panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. 3. Pull the suspected fuse straight out. Use the removal tool provided on the engine compartment fuse pane ...

Categories


Copyright В© www.kisedona.com 2016-2024