Type A
Type B
1. Close all doors, engine hood and tailgate.
2. Press the lock button(1).
3. All doors and tailgate will lock. The hazard warning lights will blink once.
4. If the lock button is pressed once more within 4 seconds, the hazard warning lights will blink and the horn will sound once.
5. Make sure that doors are locked by checking the door lock button inside or pulling the outside door handle.
Cooling Fan Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air duct (A).
3.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
4.
Disconnec ...
Troubleshooting
Troubleshooting
Ignition System
Trouble symptomProbable causeRemedyEngine will not start or is hard to start (Cranks OK)Ignition lock switchInspect ignition lock switch, or replace as required ...