Kia Sedona: Cooling Fan Description and Operation - Cooling System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Cooling Fan Description and Operation

Third generation YP (2014-2023) / Kia Sedona YP Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Description and Operation

Description
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation.
[Cooling fan operation conditions]
A/C switch
A/C pressure
[kgf/cm² G (psi G)]
Vehicle speed
[km/h (mph)]
Coolant temperature
[°C (°F)]
Cooling fan speed
OFF
ã…¡
V < 45 (28)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
ON
P < 6 (85.3)
All
105 (221) or above
HIGH
6 (85.3) ≤ P < 12 (170.7)
V < 45 (28)
45 ~ 100 (113 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
12 (170.7) ≤ P < 15.5 (120.5)
V < 45 (28)
-30 ~ 95 (-22 ~ 203)
LOW
95 (203) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
15.5 (120.5) ≤ P
All
-30 (-22) or above
HIGH

Cooling Fan Components and Components Location
Components 1. Cooling fan2. Fan motor3. Cooling fan shroud4. Cooling fan resistor ...

Cooling Fan Specifications
Specifications ItemSpecificationFan typePULLERFan speed controlResistorAir flow rate [㎥/h (yd³/h)]2,650 (3,466) - 8% min.Fan speed (rpm)1,980 ± 8%Current (A)23.3 + 10% max. ...

Other Information:

Press brake pedal to start engine (for smart key system)
This warning message illuminates if the Engine Start/Stop Button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal. It means that you ...

Yaw-rate and G Sensor Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 3. Remove the floor console. (Re ...

Categories


Copyright © www.kisedona.com 2016-2023