Kia Sedona: Console Armrest Repair procedures - Floor Console - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Console Armrest Repair procedures

Third generation YP (2014-2023) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Floor Console / Console Armrest Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
2.
After loosening the mounting screws, remove the console armrest (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Console Armrest Components and Components Location
Component Location 1. Console armrest ...

Crash Pad
...

Other Information:

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS), installed on the accelerator pedal module, detects the rotation angle of the accelerator pedal. The APS, one of the most important sensors in engi ...

Instrument Cluster Components and Components Location
Components Connector Pin Information No.DescriptionNo.Description1Ground signal321Trip switch1_Input (-) 2Illumination output (-)22-3Rheostat switch (Down)_Input23Trip switch2_Input (-)&nbs ...

Categories


Copyright © www.kisedona.com 2016-2023