Component Location |
1. Power door mirror 2. Power door mirror switch | 3. Power folding mirror switch |
Battery Sensor Repair procedures
Removal
1.
Turn the ignition switch OFF.
2.
Disconnect the battery negative (-) terminal (A).
Battery negative (-) terminal tightening nut :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft ...
Engine Control Module (ECM) Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove the air cleaner asse ...