Component Location |
1. Overdrive Clutch (OD/C) 2. One way Clutch (OWC) 3. Low & Reverse Brake (LR/B) 4. Underdrive Brake (UD/B) | 5. 26 Brake(26/B) 6. 35R Clutch (35R/C) 7. Damper Clutch (D/C) |
Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower switch (A) after loos ...
Transaxle Oil Temperature Sensor Description and Operation
Description
•
The sensor used is a thermistor (NTC) in which resistance changes with temperature variation.
•
The TCM supplies about 5 voltage to the sensor; the output value ...