Kia Sedona: Audio Unit Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Audio / Audio Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the center fascia upper panel. (Refer to Body - "Center Fascia Panel")

3.	Remove the audio head unit (A) after loosening the screws.

Remove the audio head unit after disconnecting the connectors and cable (A).

When the compact disc cannot be ejected, do not pull it out by force.

Installation

1.	Connect the audio unit connectors and cable.

2.	Install the audio head unit.

3.	Install the center fascia upper panel.

Connect the negative (-) battery terminal.

•	Make sure that the connectors are connected properly.

•	Check the audio system.

Audio Unit Components and Components Location

Components Connector Pin Information No.Connector AConnector B1Rear left speaker (+)CAN High2Front left speaker (+)-3Front right speaker (+)-4Rear right speaker (+)-5--6-USB D (+)7-USB VDD8Illum ...

Speakers Repair procedures

Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector ...

Other Information:

Steering Angle Sensor Description and Operation
Description Installed in MDPS (Motor Driven Power Steering), the Steering Angle Sensor (SAS) sends signals to HECU through CAN communication line. The SAS is used to determine turning directio ...

Rear Disc Brake Components and Components Location
Components 1. Guide rod bolt2. Bleed screw3. Caliper carrier4. Caliper body5. Inner pad shim6. Brake pad7. Pad retainer ...

Kia Sedona: Audio Unit Repair procedures

Audio Unit Components and Components Location

Speakers Repair procedures

Other Information:

Categories