To fasten the rear center belt
1. Pull out the mini tongue from hole on the belt assembly cover (1) and then slowly pull the seat belt out from the retractor.
2. Pull out the tongue plate from the holder on the seat belt (2).
3. Insert the mini tongue (A) into the open end of the anchor connector (C) until an audible
Master Cylinder Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly (A).
3.
Disconnect the brake fluid level switch connector (B), and rem ...
General Information
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting work.
The support rod must be inserted i ...