Kia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Description
26 Brake control solenoid valve is a Variable Force Solenoid (VFS) type.
When TCM supplies variable current to solenoid valve, hydraulic pressure of 26 brake is controlled by solenoid valve.

26 Brake control solenoid valve operation table
 
26/B_VFS
N/L
N, P
 
1
 
2

3
 
4
 
5
 
6

R
 

● : Connected status
26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location
Component Location 1. 26 Brake control solenoid valve (26/B_VFS) ...

26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams
Circuit Diagram ...

Other Information:

Headlamp (bulb type) -high/low
1. Open the hood. 2. Remove the front cover(1) and headlamp assembly nuts(2). 3. Remove the headlamp assembly from the body of the vehicle 4. Remove the headlamp bulb cover by turning it counte ...

Rear Heater Core Repair procedures
Replacement 1. Disconnect the battery negative terminal. 2. When the engine is cool, drain the engine coolant from the radiator. (Refer to Engine Mechanical System - “Coolant”) 3. Rem ...

Categories


Copyright © www.kisedona.com 2016-2024